Complete MIDTERM_PREP_1 and MIDTERM_PREP_2 and MIDTERM_PREP_3

Find a quiet place with a good internet connection

• 5 - Examine Drawing

• 1 - Screen Clip OR print

• 1 - New File  - Save appropriately

• 1 - Create first feature (Extrude)

• 5 - Modify to remove thru-all features (or do an extrude cut through all)

• 45 - Add other significant features

• 30 - Hole Wizards etc.

• 20 - Add mirrors, chamfers, fillets, patterns

• 45 - Troubleshooting

• 15 - Dimension checking

• 1 - Determine volume

• 10 - Create drawing (modify title block as needed)

• 5 - Insert standard views

• 15 - Insert Additional views (detail, cross-section as needed)

• 15 - Save as PDF & submit to MyCourses

• 45 - Fully dimension/annotate (Not required, but recommended)

The most this should take an intro student would be ~3.5 hours, 5.5 with 1.5x exam time, Professionally this is a 45 minute part MAX

NOTE: The image to the right is for illustration only, the actual midterm may differ

Have a printer available or get good at using the windows Snipping tool

Type in your name below along with your start time

Create the model using features we've gone over

Utilize resources such as textbook and/or YouTube

Enter your volume on the form

Save your model, submit a PDF to MyCourses with 3-4 standard views

NO dimensions required